Netgear FSM750S – 48-Port 10/100 Mbps Managed Stackable Switch with Gigabit Ports Manuale Di Riferimento
Page 10 of 121
Features
The following list identifies the key features of the NETGEAR Model FSM726S Managed Stackable Switch.
•
Twenty-four (FSM726S) or forty-eight (FSM750S) 10/100 Mbps auto sensing Fast Ethernet switching ports
•
Two Gigabit Ethernet ports that can be used either through the built-in RJ-45 ports for 10/100/1000 Mbps connectivity or through the GBIC
modules for a variety of fiber connections
modules for a variety of fiber connections
•
Two, built-in gigabit speed stacking ports for network expandability and scalability up to 144 10/100 ports, using either FSM726S or
FSM750S or a combination of them
FSM750S or a combination of them
•
Full Layer 2 switch management including:
o
SNMP
o
RMON (groups 1,2,3 and 9)
o
IEEE 802.1Q (up to 64 Static VLAN groups)
o
IEEE 802.1p (Class of Service)
o
IEEE 802.1D (Spanning Tree)
o
Port Trunking - Manual as per IEEE802.3ad Link Aggregation.
o
IGMP snooping
o
Port Mirroring
o
Password access control
o
TFTP firmware upgrade
o
Multiple interfaces: Browser-based, Telnet, or SNMP application
•
Full compatibility with IEEE standards:
o
IEEE 802.3i, (10BASE-T)
o
IEEE 802.3u (100BASE-TX)
o
IEEE 802.3ab (1000BASE-T)
o
IEEE 802.3x (full-duplex flow control)
•
Auto-sensing and auto-negotiating capabilities for all ports
•
Auto Uplink™ on all ports to make the right connection
•
Automatic address learning function to build the packet-forwarding information table. The table contains up to 8,000 media access control
(MAC) addresses (that is, the switch can support networks with as many as 8,000 devices).
(MAC) addresses (that is, the switch can support networks with as many as 8,000 devices).
•
Full- and half-duplex functions for all 10/100 ports
•
Store-and-Forward transmission to remove bad packets from the network
•
Active flow control to minimize packet loss/frame drops:
o
Half-duplex back-pressure control
o
Full-duplex IEEE 802.3x pause frame flow control
•
LED indicators for port status monitoring:
o
Power LED to indicate power on/off status
o
Link LED to indicate link status and activity
o
Dual-color Mode LED to indicate speed, activity, duplex mode, and collision
o
Stacking LED to indicate link status, activity, and master/slave status
•
Easy migration from existing 10 Mbps network to 100 Mbps Fast Ethernet network
•
Easy upgrade path to add gigabit technology to your network
•
Flexible installation:
o
Standalone desktop installation
o
19-inch standard rack-mount
•
Standard 1U case size (FSM726S) or 2U case size (FSM750S)