Netgear FSM750S – 48-Port 10/100 Mbps Managed Stackable Switch with Gigabit Ports Guida All'Installazione
Page 11 of 25
The GBIC bay accommodates a standard GBIC module, such as the NETGEAR AGM721F 1000BASE-SX
GBIC module. This module has an SC connector that is compatible with the IEEE 802.3z 1000BASE-SX
standard.
GBIC module. This module has an SC connector that is compatible with the IEEE 802.3z 1000BASE-SX
standard.
LED Descriptions
The front panel of the NETGEAR Model FSM726S/FSM750S Managed Stackable Switch has LEDs that
provide a quick and accurate display of port speed, activity, collisions, and duplex mode. The Gigabit
Ethernet ports also have LEDs that show link and mode status. Table 2-1 summarizes the LEDs on the
switch and Gigabit Ethernet module.
provide a quick and accurate display of port speed, activity, collisions, and duplex mode. The Gigabit
Ethernet ports also have LEDs that show link and mode status. Table 2-1 summarizes the LEDs on the
switch and Gigabit Ethernet module.
Table 2-1. Front Panel LEDs:
Label
Color
Activity
Description
Power Green
Yellow
On
On
On
Blinking
Off
Power is supplied to the switch.
Power On Self Test (POST) in progress
Hardware failure during POST
Power is disconnected
Power On Self Test (POST) in progress
Hardware failure during POST
Power is disconnected
Link
(the port number)
(the port number)
Green On
Off
Port has a valid link connection.
A valid link has not been established on the port.
A valid link has not been established on the port.
LED Mode in (Three LEDs)
Max Spd
ACT
FDX
ACT
FDX
Green
Green
Green
Yellow
On
Off
Blinking
Off
On
On
On
Blinking
Port has made a connection at the fastest speed possible
for that port. For 10/100 Mbps ports, it indicates a 100
Mbps connection. For a 10/100/1000 Mbps port, it
indicates a 1 Gbps connection.
Port is not operating at the fastest speed possible.
Data transmission is occurring on the port.
No data transmission is occurring on the port.
Port is operating in full-duplex mode.
Port is operating in half-duplex mode.
Collision is occurring.
Stack-In Green
On
Off
Off
Stack In port has a valid link connection.
Stack In port does not have a valid link connection
Stack In port does not have a valid link connection
Stack-Out Green
On
Off
Off
Stack Out port has a valid link connection.
Stack Out port does not have a valid link connection
Stack Out port does not have a valid link connection
Master Green
On
Off
Off
Switch acts as a master unit in a stack of FSM700S
switches.
Switch acts as a slave unit in a stack of FSM700S
switches.
switches.
Switch acts as a slave unit in a stack of FSM700S
switches.
Console Port
Your NETGEAR Model FSM726S/FSM750S Managed Stackable Switch has a console port on the front
panel. This port is labeled Console and is required for initial management configuration of the switch.
It also lets you manage the switch using a directly connected VT-100 terminal, personal computer (PC),
Apple Macintosh, or UNIX workstation. The terminal, computer, or workstation connects to the console port
using the null-modem cable supplied with your switch
panel. This port is labeled Console and is required for initial management configuration of the switch.
It also lets you manage the switch using a directly connected VT-100 terminal, personal computer (PC),
Apple Macintosh, or UNIX workstation. The terminal, computer, or workstation connects to the console port
using the null-modem cable supplied with your switch
.