Netgear GS716Tv3 – ProSAFE 16-Port Gigabit Managed Switch Guida Dell'Amministratore
Managing Device Security
222
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches
IPv6 Rules
Use the IPv6 Rules screen to configure the rules for the IPv6 Access Control Lists. The IPv6
Access Control Lists are created using the IPv6 Access Control List Configuration screen. By
default, no specific value is in effect for any of the IPv6 ACL rules.
Access Control Lists are created using the IPv6 Access Control List Configuration screen. By
default, no specific value is in effect for any of the IPv6 ACL rules.
To add a rule to an IPv6 ACL:
1.
Select Security
>
ACL > Advanced
>
IPv6 Rules.
2.
In the ACL Name list, select the name of the ACL to add a rule to.
3.
Click the Add button.
The screen displays the IPv6 ACL Rule Configuration fields.
4.
Next to Rule ID, specify a number from 1–50 to identify the IPv6 ACL rule.
You can create up to 50 rules for each ACL.
5.
Select or specify values for one or more of the following match criteria:
•
Rule ID. Enter a whole number in the range of 1 to 50 that will be used to identify the
rule. An IPv6 ACL can have up to 50 rules.
rule. An IPv6 ACL can have up to 50 rules.
•
Action. Specify what action should be taken if a packet matches the rule’s criteria.
The choices are Permit or Deny.
The choices are Permit or Deny.
•
Logging. When set to Enable, logging is enabled for this ACL rule (subject to
resource availability in the device). If the Access List Trap Flag is also enabled, then
this causes periodic traps to be generated indicating the number of times this rule was
hit during the current report interval. A fixed 5-minute report interval is used for the
entire system. A trap is not issued if the ACL rule hit count is zero for the current
interval. This field is visible for a Deny action.
resource availability in the device). If the Access List Trap Flag is also enabled, then
this causes periodic traps to be generated indicating the number of times this rule was
hit during the current report interval. A fixed 5-minute report interval is used for the
entire system. A trap is not issued if the ACL rule hit count is zero for the current
interval. This field is visible for a Deny action.
•
Assign Queue ID. Specifies the hardware egress queue identifier used to handle all
packets matching this IPv6 ACL rule. The valid range of Queue IDs is from 0 to 6.
This field is visible for a Permit Action.
packets matching this IPv6 ACL rule. The valid range of Queue IDs is from 0 to 6.
This field is visible for a Permit Action.