Zanussi ZDF21001NA Manuale Utente

• Release   when Delay and   start to flash.
• Press   . Indicators 

 , Delay and   flash. The current setting is indicated by the intermittent

flashing of the indicator 

 : e.g. 5 intermittent flashes + pause + 5 intermittent flashes = level 5.

• Press   to change the setting. Each time you press the button, the level increases. After level 10 you

will start again from level 1.

• Turn the knob to   to confirm the setting.

Before first use put one litre of water in the salt container.
Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after

you fill the salt container, start a programme.

 

The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot

rinse phase.

1. Open the water tap.

2. Set the correct programme for the type of load

and the degree of soil.

Make sure that the appliance is in Programme

selection mode.

• If the salt indicator is on, fill the salt

container.

• If the rinse aid indicator is on, fill the rinse

aid dispenser.

3. Load the baskets.

4. Start the programme.