Philips HR-1823/70 Manuale Utente

the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your 

local Philips dealer or the nearest Philips Service Centre.

Problem

Solution

The appliance does not 

work.

The appliance is equipped with a safety system. It does not work if the 

parts have not been mounted properly. Check whether the parts have 

been attached in the right way, but switch off the appliance before you 

do so.

The motor unit gives off 

an unpleasant smell the 

first few times the 

appliance is used.

This is not unusual. If the appliance continues to give off this smell after 

a few times, check the quantities you are processing and the 

processing time. After the appliance has been running for 2 minutes, 

switch it off and let it cool down for 2 minutes.

The appliance makes a 

lot of noise, smells, is too 

hot to touch, smokes etc.

Switch off the appliance and unplug it. Go to the nearest Philips 

service centre or your dealer for assistance.

The sieve is blocked.

Switch off the appliance, clean the feed tube and process a smaller 

quantity.

The sieve touches the 

feed tube or vibrates 

strongly during 

processing.

Switch off the appliance and unplug it. Check if the sieve has been 

properly placed into the pulp collector. The ribs in the bottom of the 

sieve should fit properly onto the driving shaft. Check if the sieve is 

damaged. Cracks, crazes, a loose grating disc or any other irregularity 

may cause malfunction.

9