Melitta Caffeo CI серебристая E 970-101 Manuale Utente

16  Remove the tube from the drip tray.
17  Empty the drip tray and the coffee grounds container and then reinsert 

them.

 

→ The integrated descaling programme has finished. The appliance is ready

for operation.

A Melitta

®

 Claris

®

water filter is supplied with the appliance for filtering out limescale

and other contaminants. Using the filter helps to reduce the required frequency of

descaling. The service life of your appliance will be extended thanks to the reliable 

protection from limescale. The water filter should be changed regularly, however;

at the latest, when the appliance prompts you to do so. When the water filter is

inserted, changed or removed, this must be confirmed in the Filter sub-menu. Once 

the water filter is inserted or changed, the appliance resets the water filter cycle to

zero and is able to prompt you to change the water filter again at the right time.

Put the water filter in a glass with fresh tap water for several minutes

you insert it.

•  Select the Care sub-menu.
•  Turn the rotary switch until Filter is highlighted 

and press it to confirm the selection.

•  Turn the rotary switch until Insert filter is 

highlighted and press it to confirm the selection.

•  Turn the rotary switch until Start is highlighted 

and press it to confirm the selection.

•  Lift the lid of the water tank (Fig. 

A, No. 6) and 

pull the water tank up and out of the appliance.

Care

Filter

Descaling

Exit

Filter

Insert filter

Exit

Change filter