Zigor Tamesis 18533 Dépliant
Codici prodotto
18533
Non Stop Power
• Workstations
• Telecommunications
• Networking
• Security
• Domestic use
• Data centres
• Industrial market
APPLICATIONS
ADVANTAGES
• UPS digital on-line double conversion
• Integral microprocessor control
• Power: 10,15, 20, 30, 40 & 50 kVA
• Galvanic insulation by output
transformer
• Output connections: Bornes
• Output wave: pure sinusoidal
• Acoustic and luminous signalling
• LCD screen
• Reduced harmonic distortion
• RFI filter
• Interface and communications
software: RS232/RS485
• Possibility of ample autonomy
• Automatic By-pass/ manual (20Kva)
• SNMP card optional/
RS232 Ethernet converter
• Parallel (optional)
• Parallel (optional)
TECHNICAL DESCRIPTION
Tamesis series units are full feature supply systems designed to supply high-
quality power on a permanent basis over a power range of from 10 to 50
kVA.
During ON-LINE operation, the Tamesis range, and irrespective of the
type of anomaly in the mains network, loads are galvanically
isolated and protected from all disturbances, and are provided with a
pure, controlled and harmonics-free sinusoidal wave.
Information on the status of the system is presented locally by means of
LED diode signalling and an LCD screen with a range of menus.
Information on the unit can also be managed remotely through its
powerful software.
Electiricity supply anomalies:
One problem solved
GENERAL TECHNICAL FEATURES
The Tamesis series, UPS Digital On-Line double conversion with
galvanic insulation, from 10 to 50 kVA, offers efective solutions
against
electricity supply anomalies. It is designed to work with
protect datacentres, telecom systems or any other high power
applications.
• UPS DIGITAL ON-LINE double conversion with galvanic insulation
• Three-phase input/single-phase output
• Integral microprocessor control
• Power: 10, 15, 20, 30, 40 & 50 kVA
• Acoustic and luminous signalling
• Reduced harmonic distortion of output signal
• Output wave: pure sinusoidal
• Wide input voltage range
• Protections against overloads, short-circuits & low battery voltage
• Software included for System Monitoring
• Autonomy: from 10 min (depending on load)
• Connection ports: RS232/ RS485
• Parallel N+1 (optional)
• LCD screen: with information about status of UPS
• Automatic By-pass / Manual By-pass (≥20kVA)