Philips 1250XD 1250X/42 Manuale Utente

 

◗

  Never clean, remove or replace shaving unit 

while motor is on.

 

◗

  Do not apply pressure to shaving head combs.  

Do not touch razor heads with hard objects 

as this may dent or damage precision-made 

slotted combs.

 

◗

    Do not use razor if shaving head combs are 

damaged or broken. Facial injury may occur. 

 

◗

    Do not use abrasives, scourers or aggresive 

liquids such as gasoline or acetone to clean 

the razor or Jet Clean System. 

The razor heads may be quickly cleaned after 

each use by rinsing with hot water. Water from 

the tap should be on a hot setting, BUT BE 

CAREFUL TO TEST WATER FIRST SO AS NOT 

TO BURN OR SCALD HANDS.

 

◗

  Regular cleaning guarantees better shaving 

results.

 

◗

  While rinsing razor heads, water may drip 

out of the base of razor. This is a normal 

occurrence. 

  Always turn razor OFF, remove from 

charging stand/Jet Clean System before 

cleaning. 

C

  Rinse the shaving unit by running under 

hot water for a few minutes. 

26

C

 

  Using your thumb and forefinger, grasp the 

sides of the shaving head near the center 

of the shaving unit and pull each individual 

shaving head open.

C

 

  Rinse all three shaving heads and three 

hair chambers under hot tap water by 

letting the water run in and around all the 

openings for at least 30 seconds.

BE CAREFUL TO TEST WATER FIRST SO AS 

NOT TO BURN OR SCALD HANDS.

 

  You can also brush the shaving heads and 

hair chambers with the brush supplied.

 

  Carefully shake off excess water and leave 

the shaving heads open to dry the shaving 

unit completely.

NOTE: Do not wipe or dry the shaving unit with 

a towel or tissue. This could damage the shaving 

heads.

C

 

  Press each shaving head back onto the 

shaving unit.  You will hear a ‘click’. 

 

 

 

 

 

 

 

27

C

F

C

F