Audio-Technica PRO 92cW PRO92CW Dépliant
Codici prodotto
PRO92CW
• Terminated for use with Audio-Technica UniPak
®
transmitter
wireless systems
• Comfortable headset is ideal for lecturers and other applications
requiring clear, articulate vocal projection
• Flexible, contoured loop hooks over either ear for a comfortable fit
• Natural, smooth frequency response optimized for vocal articulation
• Rugged construction designed to stand up to the challenges of
day-to-day use
• Includes storage pouch and clothing clip
• Available in black and beige models
Audio-Technica's PRO 92cW omnidirectional condenser headworn
microphone offers a natural, smooth frequency response optimized
for vocal articulation. The mic features a flexible boom design that
is easily repositioned for a comfor table fit. Ter minated to fit
Audio-Technica wireless systems, the PRO 92cW is available in black
or beige.
microphone offers a natural, smooth frequency response optimized
for vocal articulation. The mic features a flexible boom design that
is easily repositioned for a comfor table fit. Ter minated to fit
Audio-Technica wireless systems, the PRO 92cW is available in black
or beige.
Operation: The flexible design of the PRO 92cW enables it to be worn
on either the left or right ear. Position the lightweight contoured
earpiece around your ear, so that the boom extends from the top of
your ear. Remove the PRO 92cW and bend a gentle curve in the
microphone’s boom to follow the contour of your face. Again, hook
the earpiece around your ear, adjusting the earpiece and boom as
needed to achieve a secure, comfortable fit, so that the PRO 92cW is
not dislodged by shaking your head.
on either the left or right ear. Position the lightweight contoured
earpiece around your ear, so that the boom extends from the top of
your ear. Remove the PRO 92cW and bend a gentle curve in the
microphone’s boom to follow the contour of your face. Again, hook
the earpiece around your ear, adjusting the earpiece and boom as
needed to achieve a secure, comfortable fit, so that the PRO 92cW is
not dislodged by shaking your head.
The PRO 92cW has a large acoustical sweet spot; experiment with
placement near the corner of your mouth for optimal performance. A
clothing clip is provided, allowing the PRO 92cW to remain securely
in place without the weight of the cable pulling on the headset. To
install the clothing clip, slip the cable into the snap-on connector and
attach the clip to clothing, leaving enough slack on the PRO 92cW
side of the clip to allow for free, comfortable motion.
placement near the corner of your mouth for optimal performance. A
clothing clip is provided, allowing the PRO 92cW to remain securely
in place without the weight of the cable pulling on the headset. To
install the clothing clip, slip the cable into the snap-on connector and
attach the clip to clothing, leaving enough slack on the PRO 92cW
side of the clip to allow for free, comfortable motion.
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
www.audio-technica.com
P52035
©2008 Audio-Technica U.S., Inc.
Printed in U.S.A.
PRO 92cW
PRO 92cW
†
ELEMENT
Condenser
POLAR PATTERN
Omnidirectional
FREQUENCY RESPONSE
20-20,000 Hz
OPEN CIRCUIT SENSITIVITY
–45 dB (5.6 mV) re 1V at 1 Pa*
MAXIMUM INPUT SOUND LEVEL
116 dB SPL, 1 kHz at 1% T.H.D.
SIGNAL-TO-NOISE RATIO
1
60 dB, 1 kHz at 1 Pa*
CURRENT CONSUMPTION
0.3 mA typical @ 5V
VOLTAGE RANGE
1.5-9V
WEIGHT
MIC AND BOOM
4.0 g (0.14 oz)
MIC, BOOM, CONNECTOR
AND CABLE
AND CABLE
24.0 g (0.84 oz)
DIMENSIONS
MICROPHONE
21.7 mm (0.85") long,
9.2 mm (0.36") diameter
9.2 mm (0.36") diameter
BOOM
110.0 mm (4.33") long,
2.4 mm (0.09") boom
diameter
2.4 mm (0.09") boom
diameter
CABLE LENGTH
1.4 m (55")
CABLE TERMINATION
PRO 92cW, PRO 92cW-TH
PRO 92cW, PRO 92cW-TH
Terminated with locking 4-pin
connector for use with A-T
UniPak
connector for use with A-T
UniPak
®
body-pack transmitters
ACCESSORIES FURNISHED
Windscreen; clothing clip;
carrying pouch
carrying pouch
†Specifications derived by using AT8539 power module. In the interest of standards
development, A.T.U.S. offers full details on its test methods to other industry professionals
on request.
on request.
*1 Pascal = 10 dynes /cm
2
= 10 microbars = 94 dB SPL
1
Typical, A-weighted, using Audio Precision System One.
Specifications are subject to change without notice.
OMNIDIRECTIONAL CONDENSER
HEADWORN MICROPHONE
Function
Pin 1
Ground/Shield
Pin 2
Instrument
Pin 3
Mic Audio
Pin 4
Bias + In
cW, cW-TH
SCALE IS 5 DECIBELS PER DIVISION
Polar Pattern
200 Hz
LEGEND
5 kHz
1 kHz
8 kHz
12" or more on axis
LEGEND
Frequency in Hertz
Frequency Response
Response
in
dB