Cisco Headend Digital Broadband Delivery System Guida All'Installazione
Chapter 2 Configure the DNCS for xOD
66
78-4004034-01 Rev C
Verify the Session
Overview
Perform both of the following checks to verify that the session is active for the xOD
service and that it contains the correct number of continuous feeds.
Note: If you scheduled the session to start at a later time, you must wait to perform
Note: If you scheduled the session to start at a later time, you must wait to perform
these checks until after the session starts.
Verifying That the Session is Active
Complete these steps to verify that the session is active.
1 On the DNCS Administrative Console, click the DNCS tab if it is not already in
1 On the DNCS Administrative Console, click the DNCS tab if it is not already in
the forefront.
2 Click the System Provisioning tab if it is not already in the forefront.
3 Click Source. The Source List window opens.
4 Click to highlight the SAIXOD_IB source.
5 Click File and select Source Definitions. The Source Definition List window
3 Click Source. The Source List window opens.
4 Click to highlight the SAIXOD_IB source.
5 Click File and select Source Definitions. The Source Definition List window
opens for the SAIXOD_IB source.
6 Make sure the Src Def Status column for the source session displays Active as
shown in the following example. If it does not display Active, call Cisco Services.
7 Repeat steps 4 through 6 for the SAIXOD_IB_SM source and the
SAIXOD_BI_LG source.
8 Click File and select Close to close the Source Definition List window and return
to the Source List window.
9 Click File and select Close to close the Source List window and return to the
DNCS Administrative Console.
10 Your next step is to verify that the session has the correct number of CF sessions.
Go to Verifying the Number of CF Sessions (on page 67).