Cisco Headend Digital Broadband Delivery System Guida All'Installazione
Authorize a Test DHCT
78-4004034-01 Rev C
69
Authorize a Test DHCT
Introduction
Because you created a new package for xOD, you need to provision the targeted
DHCTs with this new package. This section contains instructions for adding this
package to the list of packages that are available to an individual DHCT.
Note: Use these instructions if you want to test an individual DHCT or a small
Note: Use these instructions if you want to test an individual DHCT or a small
sample of DHCTs. If you want to add the SAIXOD package to a large number of
DHCTs at once, you must add this package through your billing system. In that case,
refer to the billing system vendor’s documentation for further details.
Before You Begin
Before you begin you must have the MAC address of the DHCT you plan to use.
Authorizing a DHCT with the SAIXOD Package
Follow these steps to authorize a test DHCT to receive the SAIXOD package.
1 On the DNCS Administrative Console, click the DNCS tab if it is not already in
1 On the DNCS Administrative Console, click the DNCS tab if it is not already in
the forefront.
2 Click the Element Provisioning tab.
3 Click DHCT. The DHCT Provisioning window opens.
3 Click DHCT. The DHCT Provisioning window opens.
4 Click the Open option.
5 Click the By MAC Address option.
6 Click in the By MAC Address field and type the MAC address of the test DHCT.
5 Click the By MAC Address option.
6 Click in the By MAC Address field and type the MAC address of the test DHCT.