Cisco Headend Digital Broadband Delivery System Manuale Di Manutenzione

Pagina di 186
 
Appendix A 
FCC Test Requirements 
148 
4004455 Rev G 
11.61 Tests of EAS Procedures 
Cable System Size 
EAS Requirements 
Small Cable System Requirements Under 
Option B 
Cable systems with fewer 
than 5,000 subscribers 
per headend must comply 
with either option A or 
option B 
 
Option A
 
Provide National Level EAS 
Message on all programmed 
channels, including the 
required testing. 
 
Option B
 
Install EAS equipment that is 
capable of providing: 
1  The Audio Alert 
Messages on all 
programmed channels. 
2  Video Interrupt on all 
channels. 
3  Audio and Video EAS 
Messages on one 
programmed channel. 
Video 
Interruptions 
Must include a statement 
telling listeners on which 
channel the EAS video and 
audio message is displayed. 
Must flash a blank or black 
television screen 
simultaneously with, and of 
the same duration, as the 
EAS message. 
Cable systems with 5,000 
to 10,000 subscribers per 
headend 
Install EAS equipment that is 
capable of providing Audio 
and Video EAS Messages on 
all programmed channels. 
 
Cable systems with 
10,000 or more 
subscribers per headend 
Install EAS equipment that is 
capable of providing Audio 
and Video EAS Messages on 
all programmed channels. 
 
 
EAS Designation 
EAS instructions vary for each particular designation. Cable systems are designated 
as either participating or non-participating sources. Most cable systems have elected 
to participate in EAS and are designated as Participating National (PN) sources. 
However, cable systems that elect not to participate in the national level EAS must 
hold an FCC authorization letter. Nonparticipating systems are designated as Non-
Participating National (NN) sources. 
The EAS transmissions of national, state, and local emergencies by PN sources are 
intended for direct public reception. (47 C.F.R. Section 11.18(e)). All systems, 
including NN sources, are required to install and test EAS equipment. Upon 
activation of the national level EAS, NN sources are required to broadcast the EAS 
codes, Attention Signal, and the sign-off announcement in this handbook (Cable 
Emergency Alert System Procedures - 2007
, an FCC publication), and then stop 
operating until the end of message code is received. (47 C.F.R. Section 11.18(f))