Cisco Headend Digital Broadband Delivery System Manuale Di Manutenzione
Chapter 5 Configure the DNCS for EAS and Conduct Tests for SR 5.0 and Later
36
4004455 Rev G
Configuring the MMM Server Entry in the VASP List
The MMMRemote Server VASP setting must be configured correctly so that the EAS
can function properly. This section provides a procedure to configure the
MMMRemote Server VASP settings if one does not already exist.
can function properly. This section provides a procedure to configure the
MMMRemote Server VASP settings if one does not already exist.
Important: An MMMRemote Server VASP entry must exist for each RNCS (LIONN)
server in your network.
1 From the VASP List screen, record an unused ID number in the space provided.
server in your network.
1 From the VASP List screen, record an unused ID number in the space provided.
Unused ID number: ____________________
Note: We suggest that you sort the list before you choose an unused ID number,
in case your ID numbers are not in sequential order. To sort the list, click the ID
heading twice to see all the IDs in sequential order.
Note: We suggest that you sort the list before you choose an unused ID number,
in case your ID numbers are not in sequential order. To sort the list, click the ID
heading twice to see all the IDs in sequential order.
2 Click Add. The New VASP window opens.
3 In the VASP Type field, select MMM Server from the list.
4 In the ID field, type the unused ID you recorded in step 1.
5 In the Name field, type MMMRemote Server [name of RNCS server].
4 In the ID field, type the unused ID you recorded in step 1.
5 In the Name field, type MMMRemote Server [name of RNCS server].
Example: If your RNCS server is named LIONN1, type MMMRemote Server
LIONN1.
LIONN1.
6 In the IP Address field, type the IP address of the RNCS server.
7
7
In the Status field, select In Service.
8 Select the Site ID associated with the RNCS server from the drop-down list.