Cisco Headend Digital Broadband Delivery System Manuale Di Manutenzione
About This Guide
vi
4004455 Rev G
This document provides configuration instructions for EAS in a SARA environment.
For instructions for configuration of EAS in an tru2way
For instructions for configuration of EAS in an tru2way
TM
(formerly OCAP
TM
)
environment, refer to the Configure the DNCS for tru2way EAS Installation and
Operation Guide (part number 4019780).
Operation Guide (part number 4019780).
Audience
This document is written for operators of digital television systems that use the
SARA. System operators, field service engineers, and Cisco Services engineers may
also find the information in this document helpful.
SARA. System operators, field service engineers, and Cisco Services engineers may
also find the information in this document helpful.
Document Layout
This document covers multiple DNCS System Releases (SRs). The following chapters
have specific information for certain System Releases:
have specific information for certain System Releases:
Verify Your EAS Equipment Configuration (on page 7) - For all System Releases
Configure the Digital EAS (on page 17) - For all System Releases
Configure the DNCS for EAS and Conduct Tests for SR 5.0 and Later (on page
29) - For System Release 5.0 and later
29) - For System Release 5.0 and later
Configure the DNCS for EAS and Conduct Tests for System Releases Prior to SR
5.0 (on page 73) - For System Releases prior to SR 5.0
5.0 (on page 73) - For System Releases prior to SR 5.0
Example: If your system uses SR 4.3, you would follow the procedures in the
following chapters, in order:
following chapters, in order:
Verify Your EAS Equipment Configuration (on page 7)
Configure the Digital EAS (on page 17)
Configure the DNCS for EAS and Conduct Tests for System Releases Prior to SR
5.0 (on page 73)
5.0 (on page 73)
In addition, if you use the optional FIPS Filtering product, follow the procedures
in Appendix C - FIPS Filtering (on page 155)
in Appendix C - FIPS Filtering (on page 155)