Cisco Headend Digital Broadband Delivery System Manuale Di Manutenzione
Configure the DNCS for EAS Messages
4004455 Rev G
87
Verifying the Naming Service
Verifying the Naming Service for SR 2.2 or 3.2
Follow these steps to verify the naming service if you are using SR 2.2 or SR 3.2.
1
Open an xterm window on the DNCS.
2 Type
ps -ef | grep ns
and press Enter. A list of processes and directories
appears. Look for /dvs/tools/iona/OrbixNames1.1c/bin/ns.
Important: There should only be one listing of
/dvs/tools/iona/OrbixNames1.1c/bin/ns
Important: There should only be one listing of
/dvs/tools/iona/OrbixNames1.1c/bin/ns
3
Is /dvs/tools/iona/OrbixNames1.1c/bin/ns listed only once?
If yes, then the naming service is running and you have completed this
procedure.
procedure.
If no, follow these steps if the naming service is listed more than once.
a Use the kill command to stop all naming service processes.
b Type
a Use the kill command to stop all naming service processes.
b Type
rm /dvs/tools/iona/OrbixNames1.1c/NamesRep/ *
and
press Enter.
c Stop and then restart the ORBIX Daemon.
Note: For detailed instructions, go to Troubleshooting the ORBIX
Daemon (on page 132).
Daemon (on page 132).
d Stop and then restart the MMM Server, then go to step 4.
4 Repeat steps 1 through 3 to verify the naming service.
Note: If the naming service is still not running, call Cisco Services.