Cisco Headend Digital Broadband Delivery System Guida Utente

 

4020694 Rev B 

67 

 

Before running the 2way2oos utility, be sure that you have followed the instructions 
in Prepare the Text File, and you have properly created and saved the file of MAC 
addresses that is to be used as input for the 2way2oos utility. 

Be sure of the following important points: 

 

The file must contain only one MAC address per line. 

 

The file must be saved in the /dvs/dncs/tmp directory. 

 

The file must be named 2way2oos.txt. 

Note:  As a further precaution, system operators may want to examine the file before 
running the 2way2oos utility to ensure that the file contains only those MAC 
addresses of DHCTs that are to be marked out-of-service in the database. 

 

Follow these instructions to run the 2way2oos utility. 
1  If necessary, open an xterm window on the DNCS.  
2  Type 2way2oos.ksh and then press Enter. A message similar to the following 

appears: 
## Total Settops to process 
This could take approximately #.### hrs to complete. 
Do you want to continue? (y/n) 
Note:  The number of DHCTs and the length of time it takes to process them 
varies depending upon the number of DHCTs you have included in your text 
file. 

3  Type y and then press Enter. 

Results:     

 

The Beginning processing MAC addresses message appears. 

 

The All MACs have been processed message appears when the utility has 
finished running. 

4  Go to Stop and Restart the HCT Manager Process (on page 68). 

Note:  You need to stop and restart the HCT Manager process to make the IP 
addresses available for reuse.