Cisco Headend Digital Broadband Delivery System Guida Utente
4002178 Rev C
Front Panel Display Options
4-5
Display the Time of Day or a Blank Screen
When the Set-Top is Powered Off,
Continued
Selecting What the Set-Top Displays When Powered Off
To select what the set-top displays when powered off, complete the following steps.
Note: To allow subscribers to select whether the set-top displays the time of day or a
Note: To allow subscribers to select whether the set-top displays the time of day or a
blank screen when powered off, see Allowing Your Subscribers to Choose What
the Set-Top Displays When Powered Off, earlier in this section.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the General Settings tab.
Result: The General Settings tab appears in the forefront.
Result: The General Settings tab appears in the forefront.
5.
Make sure the option for Display: Power Off is not selected.
Result: When this field is not selected, subscribers cannot choose what the
Result: When this field is not selected, subscribers cannot choose what the
LED on the set-top displays when powered off.
6.
Select the Base Application tab to select what the set-top displays when
powered off.
Result: The Base Application tab appears in the forefront.
Result: The Base Application tab appears in the forefront.
7.
For the Display Power Off option, select one of the following settings for the
set-top:
•
•
Time when powered off. The set-top displays the time when powered off.
•
Blank when powered off. The set-top displays a blank screen when
powered off.
8.
Click Save.
Result: All of your subscribers’ set-tops will use the display you selected
Result: All of your subscribers’ set-tops will use the display you selected
when powered off.
9.
Click Cancel.
Result: The DHCT Configure prompt opens.
Result: The DHCT Configure prompt opens.
10. Click File and Close to close the DHCT Configure prompt.