Cisco Headend Digital Broadband Delivery System Guida Utente
6-6
Interactive Program Guide Options
4002178 Rev C
Display Quick Settings or General Settings from the
Interactive Program Guide
Introduction
The SETTINGS Key from IPG option allows you to display either the Quick Settings
menu or the General Settings menu from the Interactive Program Guide. When
subscribers are watching TV, pressing the SETTINGS key once displays the Quick
Settings menu and pressing the SETTINGS key twice displays the General Settings
menu. You may want to maintain this same behavior from the Interactive Program
Guide to avoid confusing your subscribers.
Recommended Setting
Display the Quick Settings menu from the Interactive Program Guide.
Displaying Quick Settings or General Settings From the Interactive Program Guide
To display either the Quick Settings menu or the General Settings menu from the
Interactive Program Guide, complete the following steps.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the Misc Settings tab.
Result: The Misc Settings tab appears in the forefront.
Result: The Misc Settings tab appears in the forefront.
5.
For the SETTINGS Key from IPG option, choose one of the following
settings:
•
•
General Settings – If enabled, subscribers can view the General Settings
menu from the Interactive Program Guide by pressing the SETTINGS key
on the remote control. The subscriber can press the SETTINGS key again
to return to watching TV.
•
Quick Settings – If enabled, subscribers can view the Quick Settings menu
from the Interactive Program Guide by pressing the SETTINGS key on the
remote control. The subscriber can press the SETTINGS key again to
display the General Settings menu.
6.
Click Save.
Result: The SETTINGS key will function on the Interactive Program Guide as
Result: The SETTINGS key will function on the Interactive Program Guide as
you specified in step 5.
7.
Click Cancel.
Result: The DHCT Configure prompt opens.
Result: The DHCT Configure prompt opens.
8.
Click File and Close to close the DHCT Configure prompt.