Cisco Headend Digital Broadband Delivery System Guida Utente
6-10
Interactive Program Guide Options
4002178 Rev C
Specify When the Interactive Program Guide Scrolls to
the Next Half-Hour Slot for Each Half-Hour Period
Introduction
The IPG scrolls option lets you specify how soon before each half-hour period that
the Interactive Program Guide scrolls to the next half-hour slot.
Recommended Setting
Set the scrolling to 10 minutes.
Specifying When the Interactive Program Guide Scrolls to the Next Half-Hour Slot
To specify how soon before each half-hour period that the Interactive Program
Guide scrolls to the next half-hour slot, complete the following steps.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the IPG tab.
Result: The IPG tab appears in the forefront.
Result: The IPG tab appears in the forefront.
5.
For the IPG scrolls field, enter the number of minutes before the half-hour
period that the Interactive Program Guide scrolls to the next half-hour slot.
The values are 0 through 30.
Example: If you set the scroll to 0, the guide will scroll at every half hour. If
Example: If you set the scroll to 0, the guide will scroll at every half hour. If
you set the scroll to 5 minutes, the guide will scroll 5 minutes before the next
half hour slot. In this example, the guide will scroll at 11:30 or 11:25,
respectively.
6.
Click Save.
Result: The Interactive Program Guide will scroll to the next half-hour slot in
Result: The Interactive Program Guide will scroll to the next half-hour slot in
the number of minutes you specified in step 5.
7.
Click Cancel.
Result: The DHCT Configure prompt opens.
Result: The DHCT Configure prompt opens.
8.
Click File and Close to close the DHCT Configure prompt.