Cisco Headend Digital Broadband Delivery System Guida Utente

Pagina di 259
6-14 
Interactive Program Guide Options 
4002178 Rev C 
Adjust How Set-Tops Use IPG Memory,
 Continued 
Configure Memory Thresholds  
SARA currently limits the amount of free memory that IPG data can consume. With 
Application Server 3.4.1 and this new release of client code, the memory threshold is 
now configurable by setting the following values: 
• 
Leave Largest Contiguous Free KB.  The value in this field indicates, in kilobytes, 
the minimum amount of contiguous free memory ("largest contiguous free block") 
that the IPG daemon in the set-tops must see available in order to download IPG 
files. 
Note:  The valid range is from 50 KB to 65535 KB
Recommended/Default setting: 512 KB  
• 
Additional Total Free in Excess of Largest Contiguous KB.  The value in this field 
indicates, in kilobytes, the minimum amount of additional free memory above and 
beyond the largest contiguous block that the IPG daemon in the set-tops must see 
available in order to download IPG files. For example, if Leave Largest 
Contiguous Free KB is set to 512 and Additional Total Free in Excess of Largest 
Contiguous KB is set to 256, then there must be at least 768 KB of total free 
memory. 
Note
:  T
he valid range is from 0 KB to 65535 KB. 
R
ecommended/Default setting: 256 KB 
 
Use Fixed Size Grid File Data Allocations KB. The value in this field indicates for 
SARA to pre-allocate the amount of memory that is configured.  This size must be at 
least 10 percent more than the largest IPG file that currently exists on the system. The 
size must be larger in order to guarantee room for new data as time progresses. This 
option actually uses more memory than if the option were not being used because of 
the inclusion of the 10 percent buffer. However, using this option guarantees that at 
each midnight, the new data coming in will fit into the existing allocations without 
having to release and reallocate memory. SARA just reuses the exact same memory 
previously occupied by the day that has expired at midnight. This behavior has the 
potential to reduce memory fragmentation that could otherwise cause the IPG 
allocation request to fail and thus not load data in set-tops that are tight on memory. 
In this configuration there should be no problem fitting the new data into memory 
for the new day.