Cisco Headend Digital Broadband Delivery System Guida Utente
4002178 Rev C
Parental Control Options
10-21
Enable the Blocking PIN Lockout,
Continued
Recommended Setting
Enable the lockout.
Enabling the Blocking PIN Lockout
To enable the Blocking PIN Lockout, complete the following steps.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the PIN Entry tab.
Result: The PIN Entry tab appears in the forefront.
Result: The PIN Entry tab appears in the forefront.
5.
Do you want to enable the Blocking PIN lockout?
•
•
If yes, make sure the Enable Blocking PIN Lockout field under Blocking
PIN is selected.
•
If no, make sure the Enable Blocking PIN Lockout field under Blocking
PIN is selected.
6.
Click Save.
Result: If you selected yes in step 5, all PIN entry is locked out after a
Result: If you selected yes in step 5, all PIN entry is locked out after a
subscriber enters an invalid PIN according to the lockout parameters that you
specify.
7.
Click Cancel.
Result: The DHCT Configure prompt opens.
Result: The DHCT Configure prompt opens.
8.
Click File and Close to close the DHCT Configure prompt.