Cisco Headend Digital Broadband Delivery System Guida Utente
4002178 Rev C
Power On and Off Options
12-5
Power On the Set-Top with Numeric Keys
Introduction
The Set: Power-On Keys option allows you to use keys other than the Power key to
power on the set-top. The Power and Numeric option enables both the Power key
and any numeric key to power on the set-top. The Power option enables only the
Power key to power on the set-top. This feature is useful for subscribers using a
universal remote control or using a remote with a more complex home theater
configuration.
This option as shown in the following illustration always appears on the General
This option as shown in the following illustration always appears on the General
Settings menu. The system administrator can set a staging default or configure it for
a specific set-top. This option is not controlled by a Global configuration.
Important: The procedure in this section covers a staging configuration. When you
send a staging configuration, you set the staging default for the set-tops in your
system. See Set Staging Defaults in Chapter 1. If you want to change a setting for
only one Set-Top, see Send a Configuration to a Single Set-Top in Chapter 1.
Recommended Setting
We recommend that your subscribers select the Power option.
Allowing Numeric Keys to Power On the Set-Top
To specify whether numeric keys can power on the set-top, complete the following
steps.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Click Staging Defaults.
Result: The Set Up Staging Defaults window opens.
Result: The Set Up Staging Defaults window opens.
4.
Select the Base Application tab to select whether numeric keys can be used to
power on the set-top.
Result: The Base Application tab appears in the forefront.
Result: The Base Application tab appears in the forefront.