Cisco Headend Digital Broadband Delivery System Guida Utente
4002178 Rev C
Timer Options
16-3
Use the Numeric Keys on the Remote Control to Set Timers and Block by
Time Values
Introduction
The Numeric Key Sets Times option allows subscribers to use the numeric keys on
the remote control to set timers in the General Settings menu or to enter values for
blocking by time. If you do not enable this option, subscribers must scroll through
the numbers on the screen to set the time.
Note: If you enable this feature, we recommend that you also enable the Numeric
Note: If you enable this feature, we recommend that you also enable the Numeric
Key Chooses Channel option.
Recommended Setting
Enable this option to allow subscribers to use the numeric keys on the remote control
to set timers in the General Settings menu.
Using the Numeric Keys on the Remote Control to Set Timers
To allow subscribers to use the numeric keys on the remote control to set timers,
complete the following steps.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the General Settings tab.
Result: The General Settings tab appears in the forefront.
Result: The General Settings tab appears in the forefront.
5.
Make sure the option for Numeric Key Sets Times is selected.
6.
Click Save.
Result: Subscribers can use the numeric keys on the remote control to set
Result: Subscribers can use the numeric keys on the remote control to set
timers in the General Settings menu for the set-top or to set values for
blocking by time.
7.
Click Cancel.
Result: The DHCT Configure prompt opens.
Result: The DHCT Configure prompt opens.
8.
Click File and Close to close the DHCT Configure prompt.