Cisco Headend Digital Broadband Delivery System
Chapter 2 Upgrading QAM Modulator Software
22
4003389 Rev B
Broadcast Sessions
If you have QAM modulators that carry broadcast sessions, use Cisco's Report
Writer to generate the Channels, Sources & Sessions Report. This report lists the
existing broadcast sessions in your system along with the channels and sources in
your system that each modulator currently carries.
Writer to generate the Channels, Sources & Sessions Report. This report lists the
existing broadcast sessions in your system along with the channels and sources in
your system that each modulator currently carries.
The Channels, Sources & Sessions Report lists each display channel (channel number)
in the system. The report also displays information about the carriage of each channel
(how the channel is transmitted on the DBDS). The report starts from each Source in
your system and ends with each QAM modulator in your system.
in the system. The report also displays information about the carriage of each channel
(how the channel is transmitted on the DBDS). The report starts from each Source in
your system and ends with each QAM modulator in your system.
Generating this report helps you to verify that these sessions are successfully rebuilt
after QAM 2.4 is downloaded to the modulator.
after QAM 2.4 is downloaded to the modulator.
Note: You can also use the DNCS Session List to determine the existing broadcast
sessions in your system.
sessions in your system.
Important! Refer to the DNCS Report Writer Version 3.5 User's Guide or the DNCS
Online Help for your system for further assistance.
Online Help for your system for further assistance.