Cisco Cisco Virtualization Experience Client 2111 Guida All'Installazione Rapida
Step 3
Attach the Cisco VXC 2111 client to the
slots previously reserved for the footstand.
(See 1 below.)
slots previously reserved for the footstand.
(See 1 below.)
Step 4
On the phone, if a protective insert is
installed in the accessory connector,
remove the covering. (See [1] the accessory
connector and [2] the USB port below.))
installed in the accessory connector,
remove the covering. (See [1] the accessory
connector and [2] the USB port below.))
Step 5
Connect the client cable connector to the
accessory connector and adjoining USB
port on the phone. Make sure both are
firmly connected.
accessory connector and adjoining USB
port on the phone. Make sure both are
firmly connected.
Step 6
Use DVI-I cables to connect the monitors
to the DVI-I outputs on the edge of the
client. For VGA monitors, use
VGA-to-DVI-I adapters. For a single
monitor, use the outer DVI-I output.
to the DVI-I outputs on the edge of the
client. For VGA monitors, use
VGA-to-DVI-I adapters. For a single
monitor, use the outer DVI-I output.
Step 7
Connect the keyboard and mouse to the
USB ports adjacent to the display ports.
USB ports adjacent to the display ports.
Step 8
Connect the 6-inch RJ-45 network cable
from the COMPUTER port on the phone
to the client Ethernet port.
from the COMPUTER port on the phone
to the client Ethernet port.
Step 9
Reattach the power cable (if applicable) to
the phone.
the phone.
Note
Depending on your configuration, you
may need to connect the phone to either a
Cisco Power Cube 4 or to an
802.3AT-compliant Power over Ethernet
port to meet the added power
requirements of the client.
may need to connect the phone to either a
Cisco Power Cube 4 or to an
802.3AT-compliant Power over Ethernet
port to meet the added power
requirements of the client.
Step 10
Reconnect the network cable into the
phone port labeled “NETWORK”.
phone port labeled “NETWORK”.
Step 11
Turn the phone to the upright position and
turn it on.
turn it on.
Step 12
To turn on the client, press the power
button for 1 to 2 seconds. When the unit
powers up, the power button turns to
white. (To power off the unit, press the
same button and hold for 8 seconds or
longer.) After the display initially appears,
it may go blank for a short time (20
seconds) and then redisplay.
button for 1 to 2 seconds. When the unit
powers up, the power button turns to
white. (To power off the unit, press the
same button and hold for 8 seconds or
longer.) After the display initially appears,
it may go blank for a short time (20
seconds) and then redisplay.
Step 13
To sign in, see your system administrator.
4
Caution Statements
Improper connection, mounting, or use of this
product could result in component failure or
undesired interference. Read the following caution
statements before setting up and operating the
Cisco VXC 2111/2211 client.
product could result in component failure or
undesired interference. Read the following caution
statements before setting up and operating the
Cisco VXC 2111/2211 client.
Setup
Caution
Do not connect the Cisco VXC 2211
to AC power until all other
connections (including the power
adapter) are made. With the Cisco
VXC 2111, do not connect the Cisco
Power Cube 4 to the phone until all
other connections are made.
Connecting or disconnecting
components or equipment when the
Cisco VXC 2211 client is receiving
AC power can cause power surges and
damage the device.
to AC power until all other
connections (including the power
adapter) are made. With the Cisco
VXC 2111, do not connect the Cisco
Power Cube 4 to the phone until all
other connections are made.
Connecting or disconnecting
components or equipment when the
Cisco VXC 2211 client is receiving
AC power can cause power surges and
damage the device.
Caution
Do not force a connector into its
socket. If any undue resistance is
encountered, ensure that the
connector is correctly oriented to the
receptacle.
socket. If any undue resistance is
encountered, ensure that the
connector is correctly oriented to the
receptacle.
Venting and care
Caution
Mount the Cisco VXC 2111 client
only as shown. Improper orientation
could inhibit the dissipation of heat
from the device and damage it.
only as shown. Improper orientation
could inhibit the dissipation of heat
from the device and damage it.
Caution
Allow sufficient space around the
Cisco VXC 2111/2211 client for
ventilation; do not place the device in
any enclosure that restricts airflow
around the device; do not place any
objects on the device.
Cisco VXC 2111/2211 client for
ventilation; do not place the device in
any enclosure that restricts airflow
around the device; do not place any
objects on the device.
Power sources
Caution
To ensure regulatory compliance, use
only the Cisco Power Cube 4.
only the Cisco Power Cube 4.
Warning
Use of power adapter other than the
Cisco Power Cube 4 may damage your
device or the power adapter. The
damage caused by an improper power
adapter is not covered by warranty.
Cisco Power Cube 4 may damage your
device or the power adapter. The
damage caused by an improper power
adapter is not covered by warranty.
Caution
If you power the Cisco VXC 2211
client using PoE, the equipment is to
be connected only to PoE networks
without routing to the outside plant.
client using PoE, the equipment is to
be connected only to PoE networks
without routing to the outside plant.
Caution
When turning off the Cisco VXC
2111/2211 client, be sure to perform a
complete shutdown (using the power
button). Do not disconnect the AC
power cord, Power over Ethernet
cable, or shut off power at a circuit
breaker (including power strips) to
turn off the device.
2111/2211 client, be sure to perform a
complete shutdown (using the power
button). Do not disconnect the AC
power cord, Power over Ethernet
cable, or shut off power at a circuit
breaker (including power strips) to
turn off the device.
Caution
Surge protectors for electrical devices
are recommended in areas of
lightning. However, when lightning is
occurring, your equipment should be
properly shut down and unplugged
from AC power until the storm has
passed.
are recommended in areas of
lightning. However, when lightning is
occurring, your equipment should be
properly shut down and unplugged
from AC power until the storm has
passed.
Caution
Be very careful to not interrupt power
while the Cisco VXC 2111/2211
client is downloading a software
update.
while the Cisco VXC 2111/2211
client is downloading a software
update.