Samsung ML-4600 Manuale Utente
U
SING
C
ONTROL
P
ANEL
3.1
Control Panel Buttons
The printer has three buttons: Toner Save, Cancel/Reprint and Demo.
Demo
Clean the inside of the printer
Press and hold Demo for about 2 seconds until the
control panel lights blink slowly to print a demo page.
The printer must be in the Ready mode.
control panel lights blink slowly to print a demo page.
The printer must be in the Ready mode.
Press and hold Demo for about 10 seconds until the
control panel lights remain lit. After cleaning the
printer, one cleaning sheet prints. For further
information, see page
control panel lights remain lit. After cleaning the
printer, one cleaning sheet prints. For further
information, see page
Print demo page
Start manual feeding
When you select Manual Feeder for Paper Source
from your software application, you should press
Demo each time you load a sheet of paper manually.
For further information, see “Using the Manual Input
Tray” on page
from your software application, you should press
Demo each time you load a sheet of paper manually.
For further information, see “Using the Manual Input
Tray” on page