Samsung WW70K52109W - 7 kg pesemine, AddWash™ Manuale Utente

Pagina di 248
English  31 
Operations
Control panel
01
02
03
04
05
06
07
08
09
10
11
01 Cycle Selector
Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time 
remaining, or an information code when a problem occurs.
03   Temp.
Press to change the water temperature for the current cycle.
04   Rinse
Press to change the rinse count for the current cycle. You can set 
the rinse count to a max of 5, depending on the cycle.
05   Spin
Press to change the spinning speed for the current cycle.
•  Rinse Hold 
: The final rinse process is suspended so that 
the laundry remains in the water. To unload the laundry, run a 
drain or spin process.
•  No Spin  : The drum does not rotate after the final drain 
process.
•  Spin Only  : To run the Spin Only cycle, press   Spin for 3 
seconds. When the cycle time and spinning speed appear, press 
 Spin repeatedly until a desired spinning speed is selected. 
Then, press   Start/Pause to start the cycle. The spinning time 
depends on the selected cycle.
06   Options
Press to select an option from Intensive, and Pre Wash. Press 
again to deselect.
•  Availability of the options depends on the cycle.
07   Bubble Soak
Press to activate/deactivate the Bubble Soak function. This 
function helps remove a wide variety of stubborn stains.
•  Bubble Soak is available with and adds up to 30 minutes to 5 
cycles: COTTON  , SYNTHETICS  , DAILY WASH  , BEDDING 
, and BABY CARE  .
Operations
Untitled-4   31
2016-10-25     11:14:35