Samsung 550DX Manuale Utente
• The remote control can be used to select
MagicInfo. However, it is recommended to use
a separate USB keyboard to utilize
MagicInfo fully.
• After connecting or disconnecting the HDMI cable used for
MagicInfo, make sure to turn
the power switches of both the monitor and the network box off and on at the same time,
or turn the monitor off and on using the remote control.
• If only the power switch of the monitor is turned off and on, the network box will not operate
normally. Make sure to turn the power switches of both the monitor and the network box
off and on.
• For
MagicInfo in Device mode, moving external devices while booting may cause errors.
Set up external devices only if the LCD Display turns on.
• Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the
program (MagicInfo) may stop. If you do unplug the cable, restart the system.
• Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the
program (MagicInfo) may stop.
• To access other sources, press the SOURCE button in
MagicInfo.
• The preset password for the LCD Display is "000000".
• The server program's Power-On option works only if the LCD Display's power is com-
pletely shut off.
Please make sure not to use the Power-On option when the LCD Display is in the process
of shutting down since this may cause system errors on the LCD Display.
• When using
MagicInfo with the MagicInfo Server Program: perform Network mode.
• When using
MagicInfo with the device directly connected to LCD Display : execute Device
mode.
• Press ESC to directly go to the
MagicInfo Window screen.
• To setup
MagicInfo on a Windows screen, a keyboard and mouse are required.
• To setup
MagicInfo on a Windows screen, refer to the MagicInfo Server Help.
It is highly recommended not to turn off the AC power during an operation.
• For pivoted LCD Displays, ticker transparency is not supported.
• For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for
movies.
• For drive D:,
EWF is not applied.
• To save Setup contents that have been changed when
EWF is in the Enable state, you
must
Commit them.
• By selecting
Disable, Enable or Commit, the system is restarted.
MagicInfo
1. Select Application - step 1
Adjusting the LCD Display