Samsung 550DX Manuale Utente
1.
Locate the AV output jacks on the camcorder. They are usually found on the side or back
of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on
the camcorder and the AV AUDIO IN [L-AUDIO-R] on the LCD Display .
of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on
the camcorder and the AV AUDIO IN [L-AUDIO-R] on the LCD Display .
2.
Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV
IN [VIDEO] on the LCD Display .
IN [VIDEO] on the LCD Display .
3.
Select AV for the Camcorder connection using the Source button on the front of the LCD
Display or on the remote control.
Display or on the remote control.
4.
Then, start the Camcorders with a tape inserted.
Note
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
Connecting a DVD Player
1.
Connect a Component cable between the BNC/COMPONENT IN - P
R
, Y, P
B
port on the
LCD Display and the P
R
, Y, P
B
jacks on the DVD player.
2.
Connect a set of audio cables between the AV AUDIO IN [L-AUDIO-R] on the LCD Dis-
play and the AUDIO OUT jacks on the DVD player.
play and the AUDIO OUT jacks on the DVD player.
Note
•
Select Component for the connection to a DVD player using the SOURCE button on the
front of the LCD Display or on the remote control.
front of the LCD Display or on the remote control.
•
Then, start the DVD Player with a DVD disc inserted.
•
A component cable is optional.
For an explanation of Component video, consult your DVD manual.
Connecting a DTV Set Top Box
Note
•
The connections for a typical Set Top Box are shown below.
Connections