Juniper CBL-M40-PWR-EU Manuale Utente
Maintain and Replace Cables and Connectors
181
Chapter 14
Maintain and Replace Cables and Connectors
This chapter describes how to maintain and replace cables and connectors:
Tools and Parts Required
To replace network and power cords, cables, and wiring, you need the following tools and
parts:
parts:
Phillips (+) screwdrivers, numbers 1 and 2
Phillips (+) screwdriver, 2.5 mm (for alarm relay contacts)
Flat-blade (–) screwdriver, 2.5 mm (for serial cable connector)
ESD grounding wrist strap
Wire cutters
7/16-in. nut driver or wrench for tightening nuts to terminal studs on a DC power supply;
if 7/16-in. tool is not available, use pliers or an adjustable wrench rather than a metric
nut driver or wrench
nut driver or wrench
Rubber safety cap to cover the PIC cable connector for each PIC fiber-optic cable
removed