APRILIA atlantic 500 Manuale Utente
63
use and maintenance Atlantic 500
3
4
6
5
7
NOTE
Insert the bulb into the bulb holder
matching the two locating pegs with their
guides in the bulb holder.
guides in the bulb holder.
◆
Fit a new bulb of equal rating. Ensure it is
positioned correctly.
positioned correctly.
◆
Reverse removal procedure to install the
bulb.
bulb.
RIGHT turn indicator:
◆
Take out the auxiliary fuse carrier (3) so
as to make disassembly operations easier.
as to make disassembly operations easier.
◆
Proceed as described for the left turn
indicator.
indicator.
NOTE
To change bulbs, you can also
remove the loudspeakers covers.
REPLACING THE HEADLIGHT
BULBS
BULBS
Read page 62 (BULBS) carefully.
The headlight accommodates the following
bulbs:
– Two high beam bulbs (4).
– One low beam bulb (5).
– One parking light bulb (6).
bulbs:
– Two high beam bulbs (4).
– One low beam bulb (5).
– One parking light bulb (6).
To replace:
◆
Remove the front cover, see page 54
(REMOVING THE FRONT COVER).
(REMOVING THE FRONT COVER).
LOW BEAM BULBS
Do not pull on the wiring to disconnect the
bulb connector.
bulb connector.
◆
Grasp the bulb electric connector and pull
to detach it from the bulb.
to detach it from the bulb.
◆
Rotate the bulb holder (7) anticlockwise
and extract it from its seat in the reflector.
and extract it from its seat in the reflector.
◆
Remove the bulb.
To refit:
NOTE
Fit the bulb into the seat in the
reflector. Ensure the three bulb pegs become
seated in the guides in the reflector seat.
seated in the guides in the reflector seat.
◆
Place the bulb holder (7) into the reflector
seat and turn it clockwise.
seat and turn it clockwise.
◆
Connect the bulb connector.
CAUTION