Samsung 1080p7 Manuale Utente

7

DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to con-

nect to a compatible Dolby Digital receiver.

- Use either an optical or coaxial digital cable to con-

nect to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.

COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component

Video in jacks. These jacks provide P

R

, P

B

and Y video. 

- If P-SCAN Video Output is selected in Setup Menu,

progressive scan mode will work.

- If I-SCAN Video Output is selected in Setup Menu,

interlaced scan mode will work.

AUDIO OUT JACKS
- Connect to the Audio input jacks of your television or

audio/video receiver. 

VIDEO OUT JACK
- Use a video cable to connect to the Video input jack

on your television.

- The Video Output in Setup Menu must be set to 

S-Video.

- Use the S-Video cable to connect this jack to the S-

Video jack on your television for higher picture quality.

- The Video Output in Setup Menu must be set to 

S-Video.

HDMI OUT JACK
- Use the HDMI cable to connect this jack to the HDMI

jack on your television for the best quality picture.

- If an HDMI cable is connected to an HDMI-compati-

ble TV, HDMI will be output automatically within 10
seconds.

- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN). 

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in
the TV’s menu system.

- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conver-

sion adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.

- There may be no image output if the DVD player is connected to a TV or display that is not compatible

with the above format.

- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.

- See pages 28 ~ 29 to get more information on how to use the setup menu.