Toshiba JK-PHO Dépliant
7.85"
11.42"
8.8"
8.8"
11.42"
8.8"
1.5"
Toshiba America Information Systems, Inc. Imaging Systems Division, Security Products Group
9740 Irvine Boulevard, Irvine, California 92618 • 1-800-550-8674 • www.cctv.toshiba.com
9740 Irvine Boulevard, Irvine, California 92618 • 1-800-550-8674 • www.cctv.toshiba.com
©2002 Toshiba America Information Systems, Inc.
All specifi cations are subject to change.
All specifi cations are subject to change.
Indoor / Outdoor Dome
JK-PHI / JK-PHO
DESCRIPTION
The JK-PHI (indoor) and JK-PHO (outdoor) are dome housings for Toshiba’s
Surveillix Dome™ camera. These products offer versatility and outstanding
camera protection in a compact size.
FEATURES
• Durable engineered plastic top, 94V0. The JK-PHO is also UV protected
• Quick connect pendant mount assembly
• Accepts single fi xed camera
• The JK-PHO is designed to meet NEMA 4X for water ingress and IP66,
with a temperature rating of -20˚ to +120˚
ARCHITECTURAL/ENGINEERING SPECIFICATIONS
The JK-PHI indoor housing and JK-PHO outdoor housing shall be a
pendant mount dome housing for Toshiba’s Surveillix Dome™ camera
system. The units shall be designed to accommodate Toshiba’s Surveillix
Dome™ camera system. The JK-PHO enclosure shall also be equipped
with blowers and thermostatically controlled heaters. The input power for
the heater and blower will be 27 watts at 24 VAC. The housings shall be
manufactured from a high-impact engineered plastic, with a UL fl ame
rating of 94V0, and the JK-PHO versioin is also UV protected. The dome
shall be made of a thermoformed, optically clear, cell-cast acrylic mterial.
The dome shall be held in place with a minimum of 3 fasteners, and a
safety cable shall be provided to hold the dome while servicing. Access to
the enclosure shall be from below with 3 captive fasteners, used to press
the dome against a sealing O-ring. A twist-off feature shall allow for the
fi nal removal of the dome. A quick-release bracket at the top of the unit
shall be provided for ease of installation and quick removal of the unit.
ELECTRICAL SPECIFICATIONS
Standard 24 VAC 27 watts (excluding camera)
MECHANICAL SPECIFICATIONS
Size (hxwxd):
12.8” x 11.4” x 16.1”
Weight:
10
lbs.
Construction:
Top:
.125”
engineered
plastic
Dome:
Cell-cast
acrylic
Pendant Mount Bracket:
Cast and machined aluminum
Components:
Seals:
.136”
x
10.25”
O-ring
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature:
JK-PHO
JK-PHO
-20˚ F to +120˚ F
Heater activates at +40˚ F (+/-8˚), deactivates at +60˚ F (+/-8˚)
Effective Projected Area (EPA): Approx. 180 square inches
Operating Humidity: Up to 100%
Effective Projected Area (EPA): Approx. 180 square inches
Operating Humidity: Up to 100%
MODELS
Outdoor Dome Housing
JK-PHO
- Pendant mount unit with clear lower dome, 24 VAC input for
heater/blower/camera
Indoor Dome Housing
JK-PHI
- Pendant mount unit with clear lower dome, 24 VAC input camera
OPTIONS/ACCESSORIES
JK-WM
- Gooseneck wall mount
JK-CMA
- Aluminum corner mount adapter
JK-PMA
- Aluminum pole mount adapter
JK-PM
- Aluminum parapet mount
Model Unit
Shipping Shipping
Weight Weight Box
Dim.
JK-PHO
10 lbs
11 lbs
17 x 14 x 17
JK-PHI
10 lbs
11 lbs
17 x 14 x 17
* Shipping weights depend on box dimensions.
JK-PHI Indoor Housing
JK-PHO Outdoor Housing
JK-PHO Outdoor Housing
JK-PHI Indoor Housing