Sub-Zero PRO 48 Manuale Utente

T O O L S A N D M A T E R I A L S   R E Q U I R E D

The following is a list of tools and materials
that should be available for proper installation
of the PRO 48.

Phillips screwdriver set

Slotted screwdriver set

Torx drive screwdriver set

4' (1.2 m) of 

1

/

4

" copper tubing and saddle

valve for the water line—part #4200880
(do not use self-piercing valves)

Copper tubing cutter

Level—2' (.6 m) and 4' (1.2 m) recom-
mended

Appliance Dolly able to support 1000 lbs
(454 kg) and adequate manpower to
handle the weight of the unit

Various sized pliers 

Wrench set

Allen wrench set

7

/

16

" hex bolt nut driver

Crescent wrenches

Cordless drill and assorted drill bits

Masonite, plywood, 

1

/

8

" pressed fiberboard,

cardboard or other suitable material to
protect finished flooring

Appropriate materials to cover and protect
the home and its furnishings during instal-
lation

R E C O M M E N D A T I O N S

The importance of the Sub-Zero PRO 48
installation cannot be overemphasized. The
installation procedure should be completed by
a qualified installer.

Before you begin the installation process, it is
recommended that you read this entire Instal-
lation Instructions book. There are key details
that you should take special care to observe
during the installation. By reading these
instructions carefully, you will make the instal-
lation process easier, problem-free and, most
importantly, safe.

The installation process is identical for both
the Model 648PROG which features a glass
door on the upper refrigerator compartment
and Model 648PRO with a solid door.

Any questions or problems about the
installation should be directed to your
Sub-Zero dealer or the Sub-Zero Customer
Service Department at 800-222-7820. You may
also check the service center locator on our
website, subzero.com.

I N S T A L L A T I O N   R E C O M M E N D A T I O N S