Toshiba P750D Manuale Utente

Pagina di 221
User’s Manual
4-18
Operating Basics
Writing Disc on Optical Disc drive
You can use the BD-Writer drives to write data to either CD-R, CD-RW, 
DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW, DVD-RAM, 
DVD-R DL or BD-R/BD-RE discs.
You can use the DVD SuperMulti drive or BD-Combo drives to write data to 
either CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, 
DVD+RW, DVD-RAM or DVD-R DL discs.
TOSHIBA Disc Creator and Corel Digital Studio are provided as writing 
software with this computer.
Corel Digital Studio can be used to write files in video format. TOSHIBA 
Disc Creator can be used to write data.
Important message
Before you write or rewrite to any of the media supported by the DVD 
Super Multi drive or BD drive, please read and follow all of the setup and 
operating instructions in this section. If you fail to do so, you may find that 
the DVD Super Multi drive or BD drive may not function properly, and you 
may fail to write or rewrite information successfully. This may cause you to 
either lose data or incur other damage to the drive or media.
Before writing or rewriting
Based on TOSHIBA's limited compatibility testing, we suggest the 
following manufacturers of CD-R, CD-RW, DVD-R, DVD-R DL, DVD-
RW, DVD+R, DVD+R DL, DVD+RW or DVD-RAM media, however, it 
must be noted that disc quality can affect write or rewrite success rates. 
Please also be aware that in no event does TOSHIBA guarantee the 
operation, quality or performance of any disc.
Turn off the power before you use the eject hole. If the disc is spinning 
when you open the disc tray, the disc could fly off the spindle and cause 
injury.
The optical drive installed on this computer cannot write multiple sessions 
on DVD-R DL disc sessions. Once a disc has been written to once, it will 
be finalized. Once finalized, no further writing to the disc will be possible 
regardless of what portion of the total disc capacity was used.
CD-R/RW media cannot be accessed using the Create CD/DVD option 
in Media Center.
When writing information to media using an optical drive, you should 
always ensure that you connect the AC adaptor to a live power socket. It is 
possible that, if data is written while powered by the battery pack, the write 
process may sometimes fail due to low battery power - in these instances 
data loss may occur.