Siemens TC63 Manuale Utente
TC63 AT Command Set
18.13 AT^SNFO
s
TC63_ATC_V00.490
Page 426 of 501
5/24/05
Confidential / Draft - Do not copy
Notes
•
specifies the amount of volume of each
is up to 65535, but will be suppressed to 32767. A value above
= 65535 will cause
an error.
• The range of
=
65535 will cause an error.
takes effect in audio modes 2 to 6. That is, when you change
and
then select another mode with
, the same step will be applied. Nevertheless, the sound quality and
the amount of volume are not necessarily the same, since all remaining audio parameters can use different
values in either mode.
• Audio mode 1 is fixed to
=4. In this mode, any attempt to change
or other parameters
returns an error.
• The value of
is stored non-volatile when the ME is powered down with
=x,1. Any other parameters changed with
need to be saved with
for use after
restart. See also
for details on restoring factory defaults.
• The values of
.
• CAUTION! When you adjust audio parameters avoid exceeding the maximum allowed level. Bear in mind that
exposure to excessive levels of noise can cause physical damage to users!