Siig 04-0322B Manuale Utente

•

Remove your computer’s cover and install the card

in an available PCI slot.

•

Push the board down firmly, but gently, until it is

well seated.  Install a slot bracket holding screw to
secure the card.

•

Now go to Device Connection to connect your

Serial ATA hard disk drive(s).

If you plan to use more than two Serial ATA channels,
you will need to purchase additional Serial ATA data
and power cables.
1.

Install hard disk drive(s) into chassis.

2.

Connect the Serial ATA hard disk drive to the system

power supply using the Serial ATA power cable.

3.

Connect one end of the Serial ATA cable to the hard

disk drive.

4.

Attach the other end of the Serial ATA cable to the

Serial ATA connector on the board.

5.

Follow the same instructions when connecting

additional hard drives.  Device connection is now
complete.