Palsonic tftv815s Manuale Utente
Connections
9
How to connect:
Connect the SCART Cable between the unit and the Decoder.
To watch Decoder
1. Turn on your LCD TV, press SOURCE button on the remote
control.
2. Push ENTER (Up/Down) to select SCART 1 and press ENTER to
confirm.
3. Turn on your Decoder.
control.
2. Push ENTER (Up/Down) to select SCART 1 and press ENTER to
confirm.
3. Turn on your Decoder.
Note:
1. The unit receives CVBS (VIDEO) signal and RGB signal from SCART1 interface and is able to identify the signal
format automatically. The unit chooses the RGB signal prior to the CVBS (VIDEO) signal.
2. To connect to external devices with AV terminals, you may use 21-pin Scart Converter to connect to SCART
interface on the unit, and the unit receives CVBS (VIDEO) signal only.
1. The unit receives CVBS (VIDEO) signal and RGB signal from SCART1 interface and is able to identify the signal
format automatically. The unit chooses the RGB signal prior to the CVBS (VIDEO) signal.
2. To connect to external devices with AV terminals, you may use 21-pin Scart Converter to connect to SCART
interface on the unit, and the unit receives CVBS (VIDEO) signal only.
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted
into their terminals.
into their terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off on the panel to avoid any issues.
Cautions before connecting
Connect a Decoder
Select Main Source
1. TV
2. Video
3. S-Video
2. Video
3. S-Video
4. SCART 1
5. SCART 2 AV
6. SCART 2 Y/C
7. YPbPr
8. D-Sub
9. HDMI
6. SCART 2 Y/C
7. YPbPr
8. D-Sub
9. HDMI
21-pin SCART
connector
connector
Decoder
C
O
M
P
M
P
O
N
N
E
N
T
I
N
D
-S
U
B
I
N
AUDIO
HDMI
DVI
D-Sub
UPDATE
RF
S
C
A
R
T
1
(
V
ID
E
O
/R
G
B
)