Philips MC-220 Manuale Utente
19
English
3140 115 30081
Clock/Timer
SIDE A/B
CLOCK
RDS
TIMER
ON
OFF
PREV
NEXT
STOP
iR
PLAY•PAUSE
RECORD
SOURCE
SELECT
SELECT
SHUFFLE
STANDBY-ON
PROGRAM
REPEAT
REV
MODE
BAND
Setting the clock
There are two possible methods for setting the
clock: manually or automatically by using RDS.
clock: manually or automatically by using RDS.
Automatic clock setting (RDS versions
only)
only)
1
Tune to a RDS station (see “Radio Reception”).
2
Press
CLOCK for more than 2 seconds.
➜ SEARCH RDS TIME is displayed for a
maximum of 90 seconds; the time is then
displayed.
➜ NO RDS TIME is displayed if no time signal
has been received and you will have to set the
clock manually.
maximum of 90 seconds; the time is then
displayed.
➜ NO RDS TIME is displayed if no time signal
has been received and you will have to set the
clock manually.
Manual clock setting
1
In standby, press
CLOCK.
➜ The clock digits for the hours flash.
2
Turn
VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
3
Press
CLOCK again.
➜ The clock digits for the minutes flash.
4
Turn
VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
5
Press
CLOCK to confirm the time.
Setting the timer
● The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
at a set time. The clock time needs to be set first
before the timer can be used.
● You can also use it to record a favourite tuner
programme at a set period (see “Recording
timer”)
timer”)
● During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
automatically.
1
In any mode, press
TIMER ON•OFF for more
than 2 seconds.
2
Turn
VOLUME clockwise to select sound
source.
➜ Display sequence shows CD, TUNER, TAPE or
➜ Display sequence shows CD, TUNER, TAPE or
REC TUNER.
3
Press
TIMER ON•OFF to confirm your
desired mode.
➜ The selected source
➜ The selected source
CD
or
TUNER
TUNER
is shown. Display sequence scrolls
SET ON
TIME and
TIMER
flashes. The clock digits for the
hours flash.
4
Turn
VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
5
Press
TIMER ON•OFF again.
➜ The clock digits for the minutes flash.
6
Turn
VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
7
Press
TIMER ON•OFF to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
TIMER
● In standby or during playback, press
TIMER ON•OFF once.
➜ Display shows
➜ Display shows
TIMER
if activated, and
disappears if deactivated.