GE 49-80535-1 Manuale Utente

Pagina di 36
Before you call for service…
GEAppliances.com
Troubleshooting Tips 
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem
Possible Causes
What To Do
Burners have yellow or
The combustion quality of 
• Use the illustrations below to determine if your burner 
yellow-tipped flames
burner flames needs to be 
flames are normal. If burner flames look like A, call for
determined visually.
service. Normal burner flames should look like or C,
depending on the type of gas you use. With LP gas, some 
yellow tipping on outer cones is normal.
A–Yellow flames
B–Yellow tips 
C–Soft blue flames
Call for service
on outer cones
Normal for natural 
Normal for LP gas
gas
Control knobs
Knob isn’t pushed down.
• To turn from the OFF position, push the knob in and 
will not turn
then turn.
Burners do
Plug on range is not 
• Make sure electrical plug is plugged into a live, properly
not light
completely inserted in the
grounded outlet.
electrical outlet.
Gas supply not connected 
• See the Installation Instructions that came with your
or turned on.
range.
A fuse in your home may be
• Replace the fuse or reset the circuit breaker.
blown or the circuit breaker 
tripped.
Burner parts not replaced 
• See the Care and cleaning of the range section.
correctly.
Control Lockout feature
• If LOC ON appears in the display, the oven control is 
is activated
locked. Turn this feature off to use the oven. See the 
Control Lockout section.
Ticking sound of spark
Control knob is still 
• Turn the knob out of the LITE position to the desired
igniter persists after
in the LITE position.
setting.
burner lights
• Turn the burner off and relight. If ticking is still 
present, call for service.
Burner flames very 
Improper air to gas ratio.
• If range is connected to LP gas, check all steps 
large or yellow
in the Installation Instructions that came with 
your range.
Oven light does 
Light bulb is loose or defective. 
Tighten or replace the bulb.
not work
Switch operating 
• Call for service.
light is broken.
Oven will not work
Plug on range is not completely 
Make sure electrical plug is plugged into a live, properly
inserted in the electrical outlet.
grounded outlet.
A fuse in your home may be 
• Replace the fuse or reset the circuit breaker.
blown or the circuit 
breaker tripped.
Oven controls improperly set.
• See the Using the oven section.
Door left in the locked position. 
If necessary, allow the oven to cool; then unlock
the door.
27
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support