Meridian Audio 541 Manuale Utente

Connecting sources

To connect to other Meridian 500
Series equipment.

●

Connect one of the Comms sockets on the rear panel of the

Surround controller to one of the comms sockets on another

500 series unit (excluding the 563), using the 500 comms lead

provided.

The sequence in which you connect the units is not important.

COMMS

COMMS

Then configure the units with the following automatic setup

procedure:

●

Switch all the units to standby.

●

Press Clear on the handset.

Each unit will display:

Auto Setup

One unit will then be designated

as the controller, and display:

Controller

This is the unit that will respond to the handset.

All the other units will be configured

as non-controllers, and display:

Not Con.

Your system is now set up and ready for use.

●

If, for any reason, the automatic setup does not give the

configuration you want, restore the default operation by

Note: Do not, under any circumstances, connect any equipment

other than Meridian 500, 600, or 200 Series to the socket

marked COMMS on the rear of the control unit.