Mercedes Benz 2008 c300 Manuale Utente
254
Controls in detail
Dual-zone automatic climate control
Adjusting air distribution
Use button
Z (
page 250) to adjust
the air distribution manually. The following
symbols are shown in display
symbols are shown in display
b:
왘
Press button
Z (
peatedly until you have select the de-
sired setting and the corresponding
symbol is shown in display
sired setting and the corresponding
symbol is shown in display
b.
The indicator lamp in button
U goes
out. The automatic air distribution is
switched off. The air distribution is
controlled according to the selected
control setting.
switched off. The air distribution is
controlled according to the selected
control setting.
Adjusting air volume
Seven blower speeds are available.
왘
Press button
· to decrease
or
volume to the desired level.
The indicator lamp in button
U
The air volume is adjusted correspond-
ing to the set blower speed. The auto-
matic air distribution remains switched
on.
ing to the set blower speed. The auto-
matic air distribution remains switched
on.
Using driver-side settings for all tem-
perature zones (Canada only)
perature zones (Canada only)
You can use the settings of the driver’s
side, such as temperature, air volume and
air distribution, for all temperature zones.
side, such as temperature, air volume and
air distribution, for all temperature zones.
왘
Activating: Press button
z
The indicator lamp in the button comes
on.
on.
The driver-side settings are used for all
temperature zones.
temperature zones.
왘
Deactivating: Press button
z
page 250) again.
The indicator lamp in the button goes
out.
out.
Symbol
Function
{
Directs air to the windshield
and the side defroster vents
and the side defroster vents
a
Directs air through the center,
side and rear passenger
compartment air vents
side and rear passenger
compartment air vents
Y
Directs air to the footwells
i
You can also select a position between two
symbols with button
Z.