Mercedes Benz 2008 c300 Manuale Utente
263
Controls in detail
3-zone automatic climate control* (Canada only)
Adjusting air distribution
Use right
a and/or left e button Z
page 259) to adjust the air distribution
manually for each side of the passenger
compartment. The following symbols are
shown in display
compartment. The following symbols are
shown in display
d:
왘
Press buttons
Z (
peatedly until you have select the de-
sired setting and the corresponding
symbol is shown in display
sired setting and the corresponding
symbol is shown in display
d.
The indicator lamp in button
U goes
out. The automatic air distribution is
switched off. The air distribution is
controlled according to the selected
control setting.
switched off. The air distribution is
controlled according to the selected
control setting.
Adjusting air volume
Use button
U (
page 259) for auto-
matic mode or button
· (
or
Q (
page 259) to adjust air volume
manually.
Seven blower speeds are available for each
side of the passenger compartment.
side of the passenger compartment.
왘
Press button
· to decrease, or
button
Q to increase air volume to
the desired level.
The indicator lamp in button
page 259) goes out.
The air volume is adjusted correspond-
ing to the set blower speed. The auto-
matic air distribution remains switched
on.
ing to the set blower speed. The auto-
matic air distribution remains switched
on.
Using driver-side settings for all tem-
perature zones
perature zones
You can use the settings of the driver’s
side, such as temperature, air volume and
air distribution, for all temperature zones.
side, such as temperature, air volume and
air distribution, for all temperature zones.
왘
Press button
z (
The indicator lamp in the button comes
on.
on.
The driver-side settings are used for all
temperature zones.
temperature zones.
Symbol
Function
{
Directs air to the windshield
and the side defroster vents
and the side defroster vents
a
Directs air through the center,
side and rear passenger
compartment air vents
side and rear passenger
compartment air vents
Y
Directs air to the footwells
i
You can also select a position between two
symbols with button
Z.