caddx nx-6 Manuale
15
SERVICE MENU
The
service light
will be “on” if the security system requires service. If the
service
light
is “on”, press the [
U
] key followed by the [2] key to determine the service
condition. One or more zone lights will illuminate indicating what service(s) is
required. Call your service provider immediately for these problems. Below is a
listing of what each light means in a service condition.
required. Call your service provider immediately for these problems. Below is a
listing of what each light means in a service condition.
LIGHT
PROBLEM
SYSTEM FAULT - Press the [1] key. The
zone light(s)
that is
illuminated corresponds to the system fault(s) below:
1
Over Current Fault
2
Siren Trouble
3
Box Tamper
4
Expander Power
5
Expander Low Battery
6
Expander Box Tamper
7
Expander Trouble
8
Ground Fault
1
Note: Faults 1 & 2 are global in nature and will affect all
partitions of a multi-partition system. Press the [#] key to return to
the 1 of 8
partitions of a multi-partition system. Press the [#] key to return to
the 1 of 8
service lights
.
2
ZONE TAMPER - Press the [2] key and the
zone light(s)
will illuminate
showing the zone(s) that are tampered. Press the [#] key to return to
the 1 of 8
the 1 of 8
service lights
.
3
ZONE LOW BATTERY - Press the [3] key. The
zone light(s)
will
illuminate showing which zone(s) has a low battery. This only applies
to wireless zones. Press the [#] key to return to the 1 of 8
to wireless zones. Press the [#] key to return to the 1 of 8
service
lights
.
4
ZONE LOSS OF SUPERVISION - Press the [4] key and the
zone
light(s)
will illuminate showing which zone(s) has loss of supervision.
This only applies to wireless zones. Press [#] key to return to the 1 of
8
8
service lights
.
5
ZONE TROUBLE - Press the [5] key and the
zone light(s)
will
illuminate showing which zone(s) has a trouble condition. Press the [#]
key to return to the 1 of 8
key to return to the 1 of 8
service lights
.
6
1
TELEPHONE FAULT - Press the [6] key. The
zone light(s)
that is
illuminated corresponds to the system fault(s) below:
6
Line Trouble / Line Cut - This light will illuminate when there is
telephone line trouble or the telephone line has been cut. The
telephone line trouble or the telephone line has been cut. The
service light
will remain lit until the telephone trouble clears and
a user code is entered.
7
Auxiliary Comm Device Fail - Radio backup has failed.
7
1
FAILURE TO COMMUNICATE - This light will illuminate when there
is a failure to communicate between your system and the central
station.
is a failure to communicate between your system and the central
station.
8
1
LOSS OF SYSTEM TIME - This light will illuminate when there has
been a loss of power and your system clock needs to be reset.
Instructions are on page 13.
Instructions are on page 13.
EXIT
Press the [#] key to exit the Service Light mode.
1
Note: This fault is global in nature and will affect all partitions of a
multi-partition system.