Hitachi c43wp910tn Manuale Utente

signal source entry

Press and hold the MENU button for 5

seconds. The INSTALL option in the 

MAIN MENU appears.

Press the cursor down button to select

INSTALL. 

Once highlighted, accept selection.

Press the cursor down button to select

MANUAL  SETUP.

Once highlighted, accept selection.

Use the cursor keys to move the

selection bar over the AV required 

to be adjusted.

Select your method of signal source

entry using the up/down cursor buttons.

Once highlighted, accept the selection to 

change your TV’s Audio Visual setting and

you will see the selection bar turn red  - it is

ready to be changed.

1

2

3

4

5

6

7

8

Each piece of external equipment connected to your TV must have its own input socket. It

would also be easier, and more organised, if the external equipment connected also had its own

program number. 

Signal Source entry allows us to tell the allocated program what equipment is

connected to which socket.

This would make the switching between normal operation and the

connected equipment much smoother.

For example,  if you want to connect a satellite to your TV - 

1. connect to socket AV1 via a scart lead.

2. give your satellite an empty programl number of its own.

3. if desired change this program name.

4. give this program number the correct AV signal source (in this case AV1).

5. If you require to connect a DVD or Laserdisc player, then connect this to AV2 or AV3 (if not RGB

output on player) or AV1 if there is RGB output on player.

AV1 is the signal source used when connecting

external equipment such as a DVD player with RGB

output through a scart lead to the AV1 socket at the rear

of your TV.