Hitachi VM-H100LA Manuale Utente

 

5. To stop recording press the Start/Stop button and REC disappears from the LCD monitor replaced by 

. This 

places the camcorder in standby. 

Note: TAPE END flashes on the LCD monitor when about 3 minutes or less remain of the tape cassette. 
Note: If the camcorder is left in record/pause mode for than 5 minutes, the camcorder turns off automatically. 
To restart it press the Start/Stop button on the camcorder and the camcorder returns to record/pause mode. 

1. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to VIDEO. 

2. Press the rewind 

 button to the position where you want to start playback. 

3. Press the play   button and play back the tape. 
To adjust the sound volume, press the FOCUS/VOLUME 

 up and   down buttons. 

 

4. Press the stop   button when you have finished. 

Note: The letters and symbols are displayed on the LCD monitor in color, but they are in black-and-white on 
the TV screen. 
Note: Decrease the sound volume of the camcorder when you play back a recording by connecting the 
camcorder to your TV. If the volume of the camcorder is set to maximum, the played back picture may be 
distorted. 

To view a still picture during playback press the Start/Stop or PAUSE button. Press either button again to resume 
playback. If you leave the camcorder in still mode for more than 5 minutes the camcorder automatically stops to 
prevent damage to the tape. 

 

Note: When you engage still mode the still picture will have some interference or noise. This is normal.