Minicom Advanced Systems 116 IP Manuale Utente
USER GUIDE
32
Figure 27 Mouse Emulation Dialog box
Select the mouse connected to the Local Console port on the Smart 116 IP, e.g. if
the local mouse is a 2 button mouse, select Standard Mouse.
the local mouse is a 2 button mouse, select Standard Mouse.
Switch Acceleration - This setting should NOT be changed.
Max Rate - this defines the maximum mouse report rate. For Sun Solaris the
default value is 20 in order to support older Sun versions.
default value is 20 in order to support older Sun versions.
23.10 Minicom icon menu features
Right-click the Minicom icon
, a menu appears. From this menu you can
access the connected devices. You also have the following features:
Disconnect – You can disconnect the session by clicking Disconnect.
About - Click About to verify the Client, Firmware, KME (Keyboard/Mouse
Emulation firmware) and Switch file versions installed on your Smart 116 IP.
Emulation firmware) and Switch file versions installed on your Smart 116 IP.
Local Settings – Click Local settings, the Client Configuration Dialog box
appears, see Figure 28
appears, see Figure 28
Figure 28 Client Configuration Dialog box
Pointer type – From the Drop-down menu you can change the Client computer
mouse pointer to appear as a dot or to not appear at all.
mouse pointer to appear as a dot or to not appear at all.
Hide Toolbar – Check this option to hide the Toolbar from the next reconnection
onwards. To toggle the Toolbar on and off, press F9 or double-click the System
tray icon
onwards. To toggle the Toolbar on and off, press F9 or double-click the System
tray icon
. See above page 25.