Minicom Advanced Systems 116 IP Manuale Utente
USER GUIDE
46
27. Upgrading the Smart 116 IP firmware
With the Smart 116 IP Switch Update software you can upgrade the firmware for
the:
the:
·
Switch processors
·
RoC/RICCs
The Update software enables you to add new features and fix bugs in a quick and
efficient manner. Install the Update software on any computer, even one not part of
the Smart 116 IP system.
efficient manner. Install the Update software on any computer, even one not part of
the Smart 116 IP system.
The software can be downloaded from the Support section at
,
it is also on the supplied CD.
For newer versions of the Update software or firmware for the Switch and
RoC/RICCs go to the Support section at
RoC/RICCs go to the Support section at
.
27.1 System requirements for the Update software
·
Pentium 166 or higher with 16 MB RAM and 10 MB free Hard Drive
space.
·
Free Serial port.
·
Windows 2000, XP or Windows 2003 Server.
27.2 Connecting the Smart 116 IP System
To update the firmware the Smart 116 IP system must be connected and switched
on.
on.
27.3 Connecting the RS232
Download cable
To run the Update software, connect the RS232 Download cable (p/n 5CB40419)
to the computer containing the software, and to the Smart 116 IP Switch Flash port
see Figure 43.
to the computer containing the software, and to the Smart 116 IP Switch Flash port
see Figure 43.