Hitachi dz-hs301e(uk) Manuale Utente

English

Use the tele-conversion lens or wide-conversion lens with the following filter diameter and thread 
pitch to record subjects for stronger telephoto or wide-angle effect:

Filter diameter: 37 mm for DZ-HS303E; 30.5 mm for DZ-HS301E; 34 mm for DZ-HS300E
Thread pitch: 0.75 mm for DZ-HS303E; 0.5 mm for DZ-HS301E/HS300E

When attaching the optional DZ-TL1 tele-conversion lens or DZ-WL1 wide-conversion lens, use the 
optional step-up ring: DZ-SR3037 for DZ-HS301E, DZ-SR3437 for DZ-HS300E (see page 136).

Remove the lens hood from DVD video 
camera/recorder, and attach the step-up ring 
over the lens.
When using the DZ-HS301E, you need not 
remove the lens hood.

Remove the cap of conversion lens, and screw 
the lens into the thread of step-up ring.
When using the DZ-HS303E, you need not 
use the step-up ring.

• Be careful not to lose the removed lens hood.
• With DZ-TL1 tele-conversion lens, the focusing range 

at “T” (telephoto) control side is between approx. 5 m 
and infinite.

• When a conversion lens is attached, note that the four 

corners of screen will be slightly dim if you zoom in on 
a subject on the W control side (wide-angle side).

• When replacing the lens, take care not to drop the 

DVD video camera/recorder.

• Attaching the conversion lens will disable the function 

of the built-in flash (for DZ-HS303E only): Specify 
“Flash: Off” (see page 60).

• If a generally available filter is attached, do not attach 

the removed lens hood.

• Some generally available conversion lenses may not 

be usable on this DVD video camera/recorder, 
depending on the lens maker.

Tele-conversion lens:

For stronger telephoto effect

Wide-conversion lens: For stronger wide-angle effect

(Attach)

Conversion lens

Lens hood

(Remove)

Step-up ring 
(only when using DZ-
HS301E/HS300E)