Hitachi VM-E521A Manuale Utente

Pagina di 50
Advanced Techniques 
- 38 - 
 
1. Turn the VCR on. 
2. Aim the remote control at the infrared receiver on the VCR and press the VCR SET button on the remote 
control and hold it, then press the button corresponding to the VCR's maker code. For example, if you have a 
RCA VCR, press the VCR SET button and hold it, then press the DISPLAY button. To check whether the remote 
control code matches that of your VCR or not, point the remote control at the infrared receiver on the VCR and 
press the VCR SET button and hold it. If the remote control code has been set, the VCR channel is counted up 
automatically. 
Note: Your VCR should have an infrared remote control. 
Note: If the channel on the VCR does not change with the above operation, you need to switch the remote 
control code of your VCR. Refer to the VCR's instruction manual. If the channel still does not change after you 
have changed the VCR's remote control code, the edit remote control cannot operate your VCR. 
VCR Brands  Press VCR SET and This Button
Hitachi REVERSE 
Sony PROGRAM 
Panasonic FORWARD 
Toshiba IN 
Mitsubishi COPY 
START 
Sanyo OUT 
Sharp 
 
NEC 
 
JVC 
 
Akai A/V 
DUB 
Gold Star 
 
PHILIPS 
 
RCA DISPLAY 
Zenith COUNTER 
RESET 
Magnavox TITLE 
ON/OFF